Analisis Pengaturan Layout Gudang Sparepart Menggunakan Metode Dedicated Storage di Gudang Bengkel Yamaha Era Motor

Imelda Agustina; Resista Vikaliana

doi:10.34149/jmbr.v18i2.271

Analisis Pengaturan Layout Gudang Sparepart Menggunakan Metode Dedicated Storage di Gudang Bengkel Yamaha Era Motor

Imelda Agustina - Program Studi Manajemen Logistik, Institut Ilmu Sosial dan Manajemen STIAMI Jl. Pangkalan Asem Raya No. 55, Cempaka Putih, Jakarta Pusat, Indonesia
Resista Vikaliana - Program Studi Manajemen Logistik, Institut Ilmu Sosial dan Manajemen STIAMI Jl. Pangkalan Asem Raya No. 55, Cempaka Putih, Jakarta Pusat, Indonesia , & Program Studi Manajemen Logistik, Institut Ilmu Sosial dan Manajemen STIAMI Jl. Pangkalan Asem Raya No. 55, Cempaka Putih, Jakarta Pusat, Indonesia , &

Abstract

Era Motor Tambun Yamaha Dealer was a company running in field of sales of various types of Yamaha motorcycles. The problems frequently faced by warehouses were the great number of parts not accommodated in the slots, same types of parts placed in more than one location, and the absence of permanent storage location, so employees frequently faced difficulties in finding required parts. The study aimed to provide spare-part layout improvement. The parts stored would be placed in permanent locations to expedite the process of storage and taking of parts from the warehouse by maintaining the existing warehouse area using Dedicated Storage method so the use of storage area in the warehouse became more optimal. The placement was based on comparison of activities of each part with spatial requirement needed by the parts. Therefore, how much actually was the area needed by spare-part warehouse could be found out. With the design of new blocks using dedicated storage methods, it was expected to minimize that the parts could occupy permanent locations to facilitate the employees in storing and taking the parts, so the in-and-out flow of parts became smooth. Furthermore, from the result of the study, it could be concluded that the amount of ratio of block area increased into 88.8% from current block area that was only 55.5%. Besides that, it also obtained the design of new blocks with size of 10x2x3 meters and layout design with total used floor area of 176 meters with total mileage of 50 meters/day..

Keywords

Warehouse Layout; Dedicated Storage; Spare Parts; Dealer

Full Text:

PDF (Bahasa Indonesia)

References

Angelia, F., Suhada, K., Studi, P., Industri, T., Kristen, U., & Bandung, M. (2020). Perbaikan Tata Letak Gudang dengan Association Rule Mining dan Dedicated Storage Policy di PD Andika – Indramayu. Journal of Integrated System Vol. 3 No. 2 (Desember 2020): Vol 3 No 2 (2020) 161–179.

Efrataditama, A. V., & Wigati, S. S. (2016). Perancangan Tata Letak Gudang Dengan Metode Dedicated Storage Di Toko Listrik Anugrah Jaya. Seminar Nasional IENACO.

Heizer, J., & Render, B. (2016). Manajemen Operasi (11th ed.). Salemba Empat.

Husin, S. (2020). Perbaikan Tata Letak Gudang Produk Jadi Dengan Metode Dedicated Storage Di Gudang PT . YYZ. Journal of Industrial and Systems Optimization, 3(1), 8–15.

Kartika, W., & Helvianto, A. W. (2018). Ruang lingkup penelitian ini Untuk Reduksi Jarak Tempuh Perjalanan Material Handling adalah rata-rata penerimaan produk forklift. Jurnal Manajemen Industri dan Logistik . 56–70.

Kemala, W., & Karo Karo, G. (2011). Usulan Perencanaan Tata Letak Gudang Produk Jadi Dengan Menggunakan Metode Muthers Systematic Layout Planning. Journal of Industrial Engineering and Management System, 4(2), 69–96.

Leopatria, M., & T, H. C. P. S. (2013). Perancangan Sistem Manajemen Gudang Tepung di PT X. 1(2), 49–56. Petra International Journal of Business Studies. http://studentjournal.petra.ac.id/index.php/teknik-industri/article/download/976/875

Mason, S. J., Ribera, P. M., Farris, J. A., & Kirk, R. G. (2003). Integrating the warehousing and transportation functions of the supply chain. Transportation Research Part E Logistics and Transportation Review 39(2):141-159

Prasetyaningtyas, A. A., Herlina, L., & Ilhami, M. A. (2013). Usulan Tata Letak Gudang Untuk Meminimasi Jarak Material Handling Menggunakan Metode Dedicated Storage. Jurnal Teknik Industri, 1(1), 29–34.

Tompkins, J. A. (2010). Facilities Planning. Wiley.

Warman, J. (2012). Manajemen Pergudangan (Ketujuh). PT Puka Sinar Harapan.

DOI: https://doi.org/10.34149/jmbr.v18i2.271

BibTex Citation Data :

@article{jmbr271,
    	author = {Imelda Agustina and Resista Vikaliana},
    	title = {Analisis Pengaturan Layout Gudang Sparepart Menggunakan Metode Dedicated Storage di Gudang Bengkel Yamaha Era Motor},
    	journal = {Journal of Management and Business Review},
    	volume = {18},
    	number = {2},
    	year = {2021},
    	keywords = {Warehouse Layout; Dedicated Storage; Spare Parts; Dealer},
    	abstract = {Era Motor Tambun Yamaha Dealer was a company running in field of sales of various types of Yamaha motorcycles. The problems frequently faced by warehouses were the great number of parts not accommodated in the slots, same types of parts placed in more than one location, and the absence of permanent storage location, so employees frequently faced difficulties in finding required parts. The study aimed to provide spare-part layout improvement. The parts stored would be placed in permanent locations to expedite the process of storage and taking of parts from the warehouse by maintaining the existing warehouse area using Dedicated Storage method so the use of storage area in the warehouse became more optimal. The placement was based on comparison of activities of each part with spatial requirement needed by the parts. Therefore, how much actually was the area needed by spare-part warehouse could be found out. With the design of new blocks using dedicated storage methods, it was expected to minimize that the parts could occupy permanent locations to facilitate the employees in storing and taking the parts, so the in-and-out flow of parts became smooth. Furthermore, from the result of the study, it could be concluded that the amount of ratio of block area increased into 88.8% from current block area that was only 55.5%. Besides that, it also obtained the design of new blocks with size of 10x2x3 meters and layout design with total used floor area of 176 meters with total mileage of 50 meters/day..},
        	issn = {2503-0736},    	pages = {152--163},    	doi = {10.34149/jmbr.v18i2.271},
        	url = {https://jmbr.ppm-school.ac.id/index.php/jmbr/article/view/271}
    }